GPS Notes
« previous | Main | next »
Add your own external GPS antenna
March 29, 2006
Engadget has an interesting article on how to build your own external GPS antenna.
All you need is:
- A suitable GPS receiver
- 26 gauge wire (0.4mm thick)
- 100pF or 47pf ceramic capacitor
- Active external GPS antenna
- BNC panel mount connector (may vary, get one to match connector for the antenna)
- 1/8 inch mini jacks or similar for power and serial output (optional)
- Tools: Soldering iron, pliers, wire strippers, drill
If you don’t know what any of this stuff means then this isn’t a project for you.
Posted by Kathie on March 29, 2006 1:58 PM.
TrackBack URL:
http://www.hacking-gps.com/cgi-bin/movabletype/mt-tb.cgi/238
« previous | Main | next »
Featured Item
Powered by Movable Type 4.1